Keep your upper. Match the pontoons, center frame and connections to your machine.
Already own a Komatsu PC300? XILINK can help source a pontoon undercarriage around your existing excavator. Start with the exact model, its attachments and the work site. “PC300” and “30-ton class” alone do not establish a fit.
Your existing upperCab, engine, hydraulics and work equipment
Slewing connection Check dimensions and interfaces
Center frameIncluded in this historical example
2 connecting cross beams
Main pontoon+ travel system
Main pontoon+ travel system
Side pontoons and spuds follow the agreed configuration.
Simplified assembly relationship. Not to scale; not an installation drawing, load calculation or approval for operation.
KEEPYour excavator upper and agreed work equipment
REPLACEThe original crawler undercarriage with a matched pontoon assembly
CHECKMechanical fit, hydraulic connections and the working conditions
What the assembly includes
Yes, the center frame can be part of the set.
Our historical PC300 configuration lists the center frame inside the undercarriage assembly. It is separate from the two cross beams. Your current quotation should identify both, so that the same part is neither omitted nor charged twice.
The example below comes from a PC300 procurement configuration. It illustrates the supply boundary, rather than a standard package for every excavator.
Main pontoons2Confirm dimensions, steel specification and the complete travel-system scope. A bare pontoon shell is different from an assembled undercarriage.
Center frame1Included in this example. Confirm how it connects to your excavator upper and whether an adapter or modification is required.
Connecting cross beams2Listed separately from the center frame. Connections and fasteners must follow the final drawings.
Side pontoons2Included in the example. Their dimensions differ between the two historical options shown below.
Spud poles2The historical record specifies 273 mm diameter and 8 m length. Confirm lifting and control equipment separately. Pole length is not an allowable working depth.
Travel system4 motorsThe record lists TM40 travel motors, three chain rows per main pontoon and polyethylene track shoes. Verify the current make, model and included drive components.
Hydraulic connectionsItemizeHoses appear in the original scope without a full itemized list. The current quotation needs interfaces, hose lengths, fittings and any locally supplied parts.
Supplier-hall reference photo. It does not establish the dimensions or PC300 fit of the options below.
A pontoon is one part of the assembly.
The photo shows an individual pontoon with its track chain. The center frame, cross beams and connections still need to be identified in the complete supply list.
Use the quotation to distinguish a pontoon shell, an equipped pontoon and a complete undercarriage. A similar exterior does not establish the same scope.
Will it fit my PC300?
Three checks before choosing the configuration
01
Identify the actual machine.
Send the full model suffix, serial number or nameplate photo, plus side views and photos around the underside connection. Describe the boom, arm, bucket, counterweight and any added attachments.
A standard boom, a long-reach front and a suspended pump create different weight and operating conditions, even when all three machines are called PC300.
02
Match the mechanical and hydraulic interfaces.
Check the slewing-ring mounting dimensions, bolt pattern and connection arrangement. For hydraulics, verify the center swivel, travel circuit and requirements of the selected travel motors.
Share existing drawings or measurements if available. If you have neither, start with the nameplate and photos. We can organize the remaining checks with the supplier; you do not need to dismantle the machine just to make the first enquiry.
03
Define how and where it will work.
Give normal and maximum water depth, current, bottom conditions and the intended job: digging, pumping or another task. Explain whether the bottom can support the machine or is soft sediment.
Floating, positioning and excavating are different operating states. The configured machine needs an agreed working envelope, stability assessment and operating limits. Adding side pontoons or spuds alone does not establish those limits.
Two historical PC300 options
9.5 m or 10.5 m? Compare the whole configuration.
A buyer's PC300 procurement request asked for both a standard and an extended pontoon option. The matching configuration record shows a difference in the side pontoons as well as the main pontoons. Dimensions below are length × width × height.
Standard option
9.5 mMain pontoon length
Each main pontoon · mm
9,500 × 1,800 × 2,000
Each side pontoon · mm
9,000 × 1,500 × 1,200
Extended option
10.5 mMain pontoon length
Each main pontoon · mm
10,500 × 1,800 × 2,000
Each side pontoon · mm
9,000 × 1,500 × 1,000
Both records list two main pontoons, two side pontoons, two spuds, one center frame, two cross beams, hoses and four TM40 travel motors.
Length alone cannot decide which option suits your excavator. Review the upper and attachment weights, working radius, pontoon arrangement and site conditions together.
Historical configuration reference only. These dimensions are not a current stock specification, quotation or compatibility guarantee for your machine.
Before dispatch and installation
Make the drawings, scope and handover agree.
Check the assembly before it leaves.
Match the interface drawing, general arrangement and itemized supply list. Confirm that the quoted center frame, cross beams, side pontoons, spuds and hydraulic connections belong to the same configuration.
Agree the factory inspection and test scope. Photos or a no-load undercarriage test cannot establish the fit and stability of the complete converted excavator.
Plan the work at your machine.
If the upper remains outside China, agree who verifies dimensions, provides lifting equipment and carries out installation and commissioning. Decide how any interface discrepancy will be resolved before dispatch.
Plan transport from the actual dismantled pieces, dimensions and weights. Operating width is not a shipping dimension. Confirm packaging, delivery point, unloading scope and the current lead time against the agreed configuration.
Start with the machine you own
Send your PC300 details.
A nameplate photo, views of the machine and the work location are enough to start. If drawings or hydraulic information are missing, say so.
Full model and existing attachments
Water depth, bottom conditions and intended work
A complete undercarriage or the specific parts you need
Quantity and delivery destination
XILINK will organize the fit checks with the supplier and separate included equipment, options and local installation work in the proposed scope. The historical PC300 examples become your configuration only after the actual machine and job have been checked.