Construction Chemicals · Liquid & Powder Grades · From China
A polycarboxylate superplasticizer that flows beautifully on one cement can under-perform two provinces over — different C3A, different alkali, a different fly-ash or slag ratio, and the same dose behaves differently. So a PCE quote means nothing until it's tested on your cement, not a reference cement. And before that: liquid or powder, because on a 50% mother solution, close to half of every drum crossing the ocean is water you paid freight on.
Orders shipped
Countries served
Product categories
Years sourcing China
Why PCE Buying Isn't Like Buying A Commodity
Send the same polycarboxylate superplasticizer to two batching plants and you can get two different outcomes — not because either plant did anything wrong, but because cement isn't a standardised input. C3A content, alkali level, the fly-ash or slag ratio in a blended cement — all of it changes how a PCE molecule adsorbs onto cement particles. A grade that flows beautifully on one cement can under-perform or over-retard on another. No datasheet catches that. Only a paste-flow trial on your own cement does.
The second decision is pure logistics: a 40% or 50% liquid mother solution is mostly water, and every ton of it rides across an ocean at full freight. A spray-dried powder carries the same active polymer at a fraction of the shipped weight. Get the form wrong and you're not overpaying for chemical — you're overpaying to ship water. That's why this page runs in order: form first, then performance grade, then the cement trial that locks both in before any container is booked.
Decide This Before You Decide Anything Else
Before water-reduction rate or slump retention, the first fork is form — because it changes what you're actually paying to ship. A 40% or 50% liquid dopes straight into the mixer; a spray-dried powder needs redissolving but travels at a fraction of the weight. Neither is "better" — they fit different plants and different routes to port.
| Attribute | 40% Liquid (Mother Solution) | 50% Liquid (Mother Solution) | Powder (Spray-Dried) |
|---|---|---|---|
| Solid content | ~40% active polymer · 60% water | ~50% active polymer · 50% water | ~90–95% active polymer |
| Freight efficiency | 2.5 t of liquid ships 1 t of active polymer | 2.0 t of liquid ships 1 t of active polymer | ~1.05 t of powder ships 1 t of active polymer |
| Shelf life | 6 months · avoid freezing | 6 months · avoid freezing, tighter cold-chain | 12 months in normal dry storage |
| Formulation freedom | High — blend retarders, air-entrainers, defoamers at your own tank | High — same, less water volume to carry | Lower — dissolve and dose, less room for on-site wet-blending |
| Who it suits | Compounding plants blending their own admixtures; batching plants near the supply chain | Same as 40% — where tank space is tighter | Buyers shipping inland or overseas who don't want to pay freight on water |
On a 40% liquid, 60% of every drum is water. On a 50% liquid, it's still half. A spray-dried powder carries almost none of it.
Tell us your route — we'll run the freight mathSee The Actual Product
The Material
PCE mother liquor or spray-dried powder — matched to your cement, not sold blind.
How It Ships
IBC totes and drums for liquor, bags for powder — you pick the freight economics.
In Use
Dosed at ready-mix and precast batching plants.
High-Range Or Retarding — Which Curve Do You Need
Once you know liquid or powder, the next fork is which performance curve — how much water it takes out, and how long the mix stays workable before it stiffens. These three families cover most ready-mix, precast and pumped-concrete jobs; the paste-flow trial below confirms the exact grade on your cement.
| Type | Water-reduction rate | Slump-loss control | Best application | Typical dosing |
|---|---|---|---|---|
| High-Water-Reduction Type HRWR | 25–30%+ | Standard — plan to place within 60–90 min | High-strength & precast concrete, low w/c mixes | 0.4–1.0% of cement weight |
| Slump-Retention Type Retarding PCE | 18–25% | Extended — engineered to hold slump through long transport or hot-weather delay | Ready-mix, long-haul pumped concrete, hot climates | 0.5–1.2% of cement weight |
| Balanced / General-Purpose All-Round | 20–25% | Moderate — standard open time | General commercial ready-mix, everyday pumped concrete | 0.4–1.0% of cement weight |
Precast, high-strength, hot-climate ready-mix or pumped concrete — describe the job and we'll shortlist the grade before you order.
Describe your mix designProve It On Your Cement Before You Buy It
Polycarboxylate superplasticizer performance is only as reliable as the cement it's dosed into — that's the biggest risk in this trade, and it's exactly what this trial removes before you commit to volume.
Send 1 kg of your cement
Plus your target application — ready-mix, precast, pumped, high-strength — and any cement data you already have (C3A%, alkali, fly-ash/slag ratio).
We run the net paste-flow test
A mini-slump (paste flow) trial across 2–3 candidate PCE grades and dosages, on your cement, checking initial flow and flow retention over time.
Concrete trial batch, if you want it
For larger orders, a small trial batch with your own aggregate confirms slump, air content and setting time against your mix design.
Lock the grade, load the container
The winning grade and dosage curve becomes your contract spec. Every production lot is checked against it.
Tropical & Summer Pours
Heat accelerates cement hydration, and a standard high-range PCE that performs well at 20°C can lose workability fast at 35–45°C — long before the mixer truck reaches site. Three levers, used together, are how a slump-retention grade earns its name in a hot climate.
A different monomer ratio delays the initial adsorption onto cement particles, buying 60–120+ extra minutes of open time over a standard high-range PCE — the usual approach for ready-mix that has to survive a long haul before it's poured.
A small secondary component keeps dispersing cement particles as the first wave of polymer is consumed by early hydration — the difference between a grade that holds slump at 40°C and one that stiffens in the drum.
Above roughly 35°C ambient, dosage typically rises 10–20% and batching water is often chilled or ice-dosed. Chemistry and site practice work together — the grade table above is the starting point, not the whole answer.
Tell us your climate and typical pour-to-place time — Central Asia, the Gulf, West Africa, Southeast Asia — and we'll shortlist a retention grade before you order.
Get a hot-climate recommendationReading The Quotes
Two quotes for "40% PCE, IBC tote" can sit far apart and both be honest — polycarboxylate superplasticizer isn't one product any more than "cement" is. A high-range grade at 50% solids and a retarding slump-retention grade at 40% solids are different polymers doing different jobs. When a quote looks impossibly cheap for the grade and dosage your trial confirmed, the usual explanation is a lower solid content or a grade swap you didn't ask for.
We quote against the exact grade and form your cement trial confirmed, name the solid content on the drum or bag, and put the measured value on the COA — so you're comparing the same polymer, not the same three letters.
— Matt, XILINK founder · 13 years sourcing & exporting industrial products from China
Send Your Cement Type & Application — Reference Price In 24hThe four levers behind every PCE quote
Monomer feedstock
PEG macromonomer and unsaturated acid are the base cost every producer starts from. It moves month to month — which is why we quote a current-month reference price, not a number carved into a webpage.
Solid content
A 50% liquid carries more active polymer per drum than a 40% liquid, so it costs more per drum — usually less per kilogram of active polymer once freight is in the number.
Liquid vs powder
Spray-drying adds a processing step, so powder typically costs more per kilogram of active content than liquid — and still often wins on landed cost once you're shipping it a long way.
Side-chain engineering
A standard high-water-reduction grade uses a simpler monomer ratio than a retarding, slump-retention grade — the more complex the polymer design, the tighter and costlier the process control.
What We Ship
Every lot ships with a certificate of analysis carrying the measured solid content, water-reduction performance and chloride/alkali values against the grade your paste-flow trial confirmed, plus the production date on the drum or bag. Independent third-party inspection before the balance payment is available on any order.
You don't have to fill a container with one product. A trial order of polycarboxylate superplasticizer from 1 ton rides alongside SNF superplasticizer and HPMC in the same container — Central Asia, South America, the Middle East, Africa or Southeast Asia, one bill of lading.
Budget-sensitive project? See the SNF page for the naphthalene-based alternative, or the whole construction chemicals range.
| CAS number | No single CAS — PCE is a family of proprietary comb copolymers; grade is defined by solid content & monomer chemistry, not by CAS |
| Appearance | Liquid: pale yellow to light brown, transparent · Powder: white to off-white, free-flowing |
| Solid content | 40% or 50% (liquid) · 90–95% active (spray-dried powder) |
| Water reduction rate | 18–30%+, by grade — see grade table above |
| Chloride ion content | ≤ 0.01% — low-chloride, safe for reinforced & prestressed concrete |
| Alkali content (Na2O eq.) | ≤ 3–5%, by grade · low-alkali grades available for alkali-sensitive aggregate |
| pH, liquid as supplied | 6–8 |
| Packaging | Liquid: 1,000 L IBC totes or 200 kg drums · Powder: 25 kg kraft/PE-lined bags on pallets |
| Shelf life | Liquid 6 months, avoid freezing & direct sun · Powder 12 months in dry storage |
| Trial order | From 1 ton · consolidates with SNF, HPMC & other construction chemicals in one container |
| Documents | Per-lot COA · MSDS · third-party inspection on request |
Straight Answers
Send 1 kg of your cement — and aggregate too, if you want a full concrete trial — plus your target application. We run a net paste-flow (mini-slump) test across 2–3 candidate PCE grades and dosages on your actual cement, not a reference cement, and report back which grade and dosage curve actually performed. That tested combination becomes your contract spec.
It depends on your plant and your freight route, not on which is "better." Liquid (40% or 50% solids) doses straight into the mixer and suits compounding plants or batching plants close to the supply chain. Powder carries roughly the same active polymer per kilogram at a fraction of the shipped weight, since you're not paying ocean freight to move the water in a liquid drum — it usually wins for buyers shipping inland or a long distance overseas.
Tropical and summer pours lose workability fast because heat accelerates cement hydration. We formulate with retarding side-chain PCE grades that delay initial adsorption for extra open time, sometimes combined with a slow-release monomer component, and we advise on site adjustments too — typically a 10–20% dosage increase and chilled batching water above roughly 35°C ambient.
Trial orders start from 1 ton. Polycarboxylate superplasticizer consolidates with SNF, HPMC, RDP and other construction chemicals in the same container, so a first order can be a mixed pallet load — you don't need a full container of one product to get started.
Standard high-water-reduction and slump-retention grades are usually produced within 7–15 days of order confirmation, once your cement trial has locked the spec. Ocean transit depends on your route and is confirmed with the quote. Repeat buyers get staggered shipments so the batching plant never runs short.
Tested On Your Cement, Loaded On Your Terms
Tell us your cement type, target application, and whether you're leaning liquid or powder. We come back within 24 hours with the shortlisted polycarboxylate superplasticizer grades, the paste-flow trial plan and the current-month reference price.
Free 1 kg paste-flow trial before any container
Prefer chat? Message us on WhatsApp
Thank you — within 24 hours you'll have the shortlisted grades, the paste-flow trial plan and the current-month reference price.
Please message us on WhatsApp and we'll pick it up right away.